Solar PL2410 Pro-Logix Intelligent Battery Charger/Maintainer, 12V/24V, 10/6/2 Amp, Temperature Compensation

Solar PL2410 Pro-Logix Intelligent Battery Charger/Maintainer, 12V/24V, 10/6/2 Amp, Temperature Compensation

• Solar PL2410 is a Pro-Logix intelligent battery charger and maintainer for 12V and 24V systems. It delivers fully automatic, multi-phase charging with 10, 6, or 2 amp rates, plus temperature compensation and recondition mode for sulfated batteries. This is a standalone charger, not a replacement part.
• Features:
  • 10/6/2 amp charge rates support everything from quick turnaround to long-term maintenance for varied battery sizes.
  • Multi-phase automatic charging with soft start and recondition mode helps recover distressed or sulfated batteries for better service life.
  • Temperature-compensated charging adjusts output to conditions to reduce undercharge or overcharge risk.
  • Compatible with flooded, AGM, gel, spiral wound, deep cycle, and LiFePO4 batteries to cover mixed fleets and shop needs.
  • Standalone tool for charging and maintenance; not a replacement part for a specific SKU or vehicle system.
• Specifications:
  • Manufacturer: Clore Automotive (Solar)
  • Part Number: PL2410
  • Operating Voltage: 12V or 24V
  • Charge Rates: 10/6/2 amp, automatic multi-phase
  • Battery Types: Flooded, AGM, gel, spiral wound, deep cycle, LiFePO4
  • Functional Modes: Soft start, recondition, enhanced maintenance
  • Temperature Compensation: Yes
  • Charging Phases: 7
  • Output Cables: 72 in, 12 AWG
  • Weight: 4.7 lb
  • System Compatibility or Application: For charging and maintaining 12V or 24V batteries; not a replacement part
  • Quantity: 1 charger
• The Pro-Logix Intelligent Battery Charger/Maintainer can also be referred to as 12V 24V smart charger, battery maintainer, battery desulfator, temperature compensated charger, and Pro-Logix PL2410 charger.

Solar by Clore Automotive designs shop grade charging solutions for professional service environments. The PL2410 provides temperature-compensated, multi-phase charging with recondition and maintenance modes to properly charge and care for a wide range of 12V and 24V batteries.

Q: Can PL2410 charge LiFePO4 batteries?
A: Yes. It supports LiFePO4 along with flooded, AGM, gel, spiral wound, and deep cycle batteries. Always select the correct battery type on the control panel.

Q: What charge rate should I use?
A: Use 2 amp for small batteries or long-term maintenance, 6 amp for general charging, and 10 amp for faster charging when the battery and manufacturer guidance allow.

Q: Is the PL2410 a replacement part for a specific charger or vehicle system?
A: No. It is a standalone charger and maintainer designed to service 12V and 24V batteries across multiple chemistries; it does not replace a specific SKU.