Transtar 1031 Mul-TIE Adhesion Promoter & Tie-Coat, Amber, Ready to Use, 1 Gallon

Transtar 1031 Mul-TIE Adhesion Promoter & Tie-Coat, Amber, Ready to Use, 1 Gallon

• This automotive adhesion promoter is used under primers on flexible and rigid plastic parts, as a tie-coat between fresh or existing primer and color, and when refinishing aluminum or steel.
• Features:
  • Suitable substrates include rigid, flexible, and soft plastics, bare steel, bare aluminum, fiberglass, SMC gel coat, body filler, primers, and compatible existing finishes.
  • Plastic parts receive one medium coat followed by a 20 to 30 minute flash before priming or topcoating.
  • Aluminum and steel applications use two coats with a 5 to 10 minute flash between coats and a 20 to 30 minute minimum dry period before topcoating.
• Specifications:
  • Manufacturer: Transtar
  • Part Number: 1031
  • Product Type: Adhesion Promoter and Tie-Coat
  • Capacity: 1 Gallon
  • Color: Amber
  • Mix Ratio: Ready to Use
  • Shelf Life: 3 Years
  • VOC Actual: 4.78 lb/gal, 573 g/L
  • VOC Regulatory: 6.58 lb/gal, 788 g/L
• The Transtar Mul-TIE Adhesion Promoter can also be referred to as automotive adhesion promoter, plastic adhesion promoter, automotive tie-coat, refinish adhesion promoter, and paint adhesion promoter.

Transtar Autobody Technologies develops and manufactures automotive aftermarket repair, refinish, and detail products, including plastic repair materials, adhesives, sealants, specialty coatings, primers, clearcoats, compounds, and accessories.

Q: What spray gun tip size is recommended for gravity-feed application?
A: The recommended gravity-feed tip size is 1.2 to 1.4 mm.

Q: What spray gun tip size is recommended for HVLP or LVLP application?
A: The recommended HVLP or LVLP tip size is 1.2 to 1.5 mm.

Q: How long can Mul-TIE remain before recoating aluminum or steel?
A: It can be recoated for up to 24 hours from application when following the specified aluminum or steel procedure.