U-POL UP0722 Gravitex Plus 1K Underbody and Stone Chip Coating, White, 1 Liter Bottle, 425 g/L VOC

U-POL UP0722 Gravitex Plus 1K Underbody and Stone Chip Coating, White, 1 Liter Bottle, 425 g/L VOC

• This high-solids coating reproduces the original textured stone chip protective finish on automotive underbody areas, wheel arches, rocker panels, compartments, and panels. It protects against stone chips, salt, rust, and dampness and can be overpainted after drying.
• Features:
  • Ready-to-use 1K formula requires no measuring or mixing.
  • High-build formulation covers weld marks and seams.
  • Sound and vibration dampening makes it suitable for application inside compartments and panels.
  • Can be overpainted with most paint systems after drying.
• Specifications:
  • Manufacturer: U-POL
  • Part Number: UP0722
  • UPC: 501079610188
  • Product Type: Underbody coating and stone chip protector
  • Color: White
  • Capacity: 1 Liter
  • Packaging Type: Bottle
  • Formula: 1K
  • Application Coats: 1-2 coats
  • Film Build: Approximately 100-150 microns per coat
  • Flash Time: 10-15 minutes between coats
  • Dry Time: 4-6 hours depending on film build and ambient temperature
  • Air Pressure: 3-5 bar
  • Regulatory VOC: 425 g/L
  • Actual VOC: 415 g/L
  • Substrates: Original paint, bare metal, SMC, fiberglass, polyester filler, prepared aluminum, and galvanized surfaces
• The U-POL UP0722 Gravitex Plus Underbody Coating can also be referred to as stone chip protector, automotive underbody coating, high-build stone guard, white undercoating, and textured protective coating.

U-POL specializes in automotive refinishing products including fillers, coatings, aerosols, adhesives, and paint-related products. The company has more than 75 years of industry experience and sells products in more than 100 countries.

Q: How many coats of U-POL UP0722 should be applied?
A: Apply 1-2 coats with 10-15 minutes between coats.

Q: What substrates can U-POL UP0722 be applied to?
A: It is suitable for original paint, bare metal, SMC, fiberglass, polyester filler, and properly prepared aluminum and galvanized surfaces.

Q: What spray pressure is specified for U-POL UP0722?
A: The application pressure is 3-5 bar when using the U-POL GUN/1.