U-POL UP0723 Gravitex Plus 1K Underbody and Stone Chip Coating, Gray, 1 Liter

U-POL UP0723 Gravitex Plus 1K Underbody and Stone Chip Coating, Gray, 1 Liter

• This high-build automotive coating protects underbody surfaces against stone chips, salt, dampness, and rust while reproducing an original-style stone chip protective finish. It is also suitable inside compartments and panels where sound and vibration dampening are useful.
• Features:
  • Ready-to-use 1K formula requires no measuring or mixing.
  • Suitable for original paint, bare metal, SMC, fiberglass, polyester filler, and properly prepared aluminum or galvanized surfaces.
  • Apply 1 to 2 coats with approximately 100 to 150 micron build per coat.
  • Can be overpainted with most paint systems after drying.
• Specifications:
  • Manufacturer: U-POL
  • Part Number: UP0723
  • Product Type: Underbody and Stone Chip Coating
  • Size: 1 Liter
  • Color: Gray
  • Packaging Type: Bottle
  • Formula: 1K Ready to Use
  • Flash Time Between Coats at 68 F: 10 to 15 Minutes
  • Drying Time at 68 F: 4 to 6 Hours
  • Regulatory VOC: 425 g/L (3.5 lb/gal)
  • Actual VOC: 412 g/L (3.4 lb/gal)
  • Shelf Life: 2 Years
• The U-POL Gravitex Plus Underbody and Stone Chip Coating can also be referred to as underbody coating, stone chip protector, automotive undercoating, high build protective coating, and paintable underbody coating.

U-POL specializes in automotive refinishing materials including fillers, coatings, aerosols, adhesives, and paint-related products. The company sells automotive refinishing products in more than 100 countries.

Q: Does UP0723 require mixing or a hardener?
A: No. Gravitex Plus UP0723 is a ready-to-use 1K coating.

Q: What surfaces can Gravitex Plus be applied to?
A: It is suitable for original paint, bare metal, SMC, fiberglass, polyester filler, and properly prepared aluminum or galvanized surfaces.

Q: How many coats should be applied?
A: Apply 1 to 2 coats with a 10 to 15 minute flash time between coats at 68 F.

Q: Can Gravitex Plus be painted over?
A: Yes. It can be overpainted with most paint systems after drying.