U-POL UP0803 Power Can Professional Spray Paint Aerosol, Gloss Black, 500 ml

U-POL UP0803 Power Can Professional Spray Paint Aerosol, Gloss Black, 500 ml

• Ready-to-use automotive topcoat for finishing primed surfaces and restoring OEM-style appearance around windows, doors, handles, mirrors, bumpers, and other trim areas.
• Features:
  • Pressurized aerosol uses a specialized large fan pattern with high output, high opacity, and a no-overspray nozzle.
  • Suitable for primed surfaces, prepared OEM paint, aluminum, galvanized metal, ABS, PVC, TPO, EDPM, and polypropylene.
  • Apply 1 to 2 coats from approximately 10" from the surface.
  • Dry film build is approximately 0.4 mil with theoretical coverage of approximately 21.5 sq ft per aerosol.
  • Handleable after approximately 30 minutes at 68 F.
• Specifications:
  • Manufacturer: U-POL
  • Part Number: UP0803
  • Product Type: 1K automotive topcoat aerosol
  • Color: Gloss Black
  • Capacity: 500 ml
  • Application: 1 to 2 coats
  • Application Distance: Approximately 10"
  • Dry Film Build: 0.4 mil
  • Theoretical Coverage: Approximately 21.5 sq ft per aerosol
  • Handleable Time: Approximately 30 minutes at 68 F
• The Power Can Professional Spray Paint Aerosol can also be referred to as gloss black automotive aerosol paint, high gloss trim paint, automotive topcoat spray paint, professional refinishing aerosol, and gloss black trim aerosol.

U-POL manufactures automotive refinishing products including fillers, coatings, aerosols, adhesives, and paint-related products. Its products are sold in more than 100 countries for professional automotive refinishing applications.

Q: What surfaces can UP0803 be applied over?
A: It is suitable for primed surfaces, prepared OEM paint, aluminum, galvanized metal, ABS, PVC, TPO, EDPM, and polypropylene with the specified surface preparation.

Q: How should UP0803 be applied?
A: Apply 1 to 2 coats from approximately 10" from the surface, allowing 20 to 30 minutes between coats at 68 F.

Q: What preparation is recommended before applying UP0803 to plastic?
A: Clean and degrease the plastic, allow it to dry, then apply 1 to 2 coats of U-POL GRIP#4 UP0799 and allow 20 minutes before overcoating.