U-POL UP2892 System 20 Spot/Panel Clearcoat, 4:1, Clear, 1 US Gallon Tin

U-POL UP2892 System 20 Spot/Panel Clearcoat, 4:1, Clear, 1 US Gallon Tin

• A medium-solids two-component acrylic coating for localized automotive refinishing. It produces a high-build UV-resistant finish with good flow and non-sag properties and can be air dried, low baked, or infrared cured before polishing.
• Features:
  • Can be applied undiluted or reduced with UP2401, UP2411, or UP2421 reducer.
  • HVLP application uses a 1.3 to 1.6 mm tip at 28 psi.
  • Apply 2 to 3 wet coats with 5 to 10 minutes flash time between coats.
  • Pot life is 6 to 8 hours, with air-dry through cure in approximately 4 to 6 hours.
  • Requires a compatible U-POL System 20 hardener, sold separately.
• Specifications:
  • Manufacturer: U-POL
  • Part Number: UP2892
  • Product Type: 2K acrylic spot and panel clearcoat
  • Color: Clear
  • Capacity: 1 US Gallon
  • Packaging Type: Tin
  • Mix Ratio: 4:1 clearcoat to hardener
  • Reducer Options: UP2401, UP2411, UP2421
  • HVLP Gun Tip: 1.3 to 1.6 mm
  • Air Pressure: 28 psi
  • Coats: 2 to 3 wet coats
  • Dry Film Build: 1 to 1.5 mil
  • Flash Time: 5 to 10 minutes
  • Pot Life: 6 to 8 hours
  • Tack Free Time: Less than 20 minutes
• The U-POL System 20 Spot/Panel Clearcoat can also be referred to as spot panel clearcoat, 4:1 automotive clearcoat, medium solids clearcoat, panel repair clearcoat, and System 20 clearcoat.

U-POL is a global automotive refinishing manufacturer specializing in fillers, coatings, aerosols, adhesives, and paint-related products, with 75 years of industry experience and sales in more than 100 countries.

Q: Does UP2892 include the required hardener?
A: No. A compatible U-POL System 20 hardener is required and sold separately.

Q: Which reducers can be used with UP2892?
A: UP2892 can be reduced with UP2401, UP2411, or UP2421 reducer.

Q: What spray gun setup is specified for UP2892?
A: Use an HVLP gravity gun with a 1.3 to 1.6 mm tip at 28 psi.