U-POL UP0884 GUARD#10 Gravi-Gard Stone Chip Protector, Gray Textured Finish, 450 ml Aerosol

U-POL UP0884 GUARD#10 Gravi-Gard Stone Chip Protector, Gray Textured Finish, 450 ml Aerosol

• Protective automotive coating for body panels and other prepared surfaces exposed to stone chips, salt, moisture, and rust. The high build coating can also be overpainted with most waterborne or solvent-based paint systems after drying.
• Features:
  • Includes two application nozzles for recreating a range of OEM-style textures.
  • Sound dampening properties suit body panels and inside engine compartments.
  • Suitable for prepared bare metal, aluminum, galvanized surfaces, fiberglass, SMC, lightly abraded E-coat, prepared OEM paint, and properly prepared bumper covers.
  • Apply 1 to 2 coats from approximately 10" from the surface.
  • Drying time is approximately 3 to 4 hours at 68 F.
• Includes:
  • GUARD#10 Gravi-Gard Stone Chip Protector aerosol
  • Two application nozzles
• Specifications:
  • Manufacturer: U-POL
  • Part Number: UP0884
  • Product Type: Stone chip protector aerosol
  • Color: Gray
  • Finish: Textured
  • Capacity: 450 ml
  • Dry Film Build: 2 mil
  • Theoretical Coverage: Approximately 43.1 sq ft per aerosol
  • Application: 1 to 2 coats
  • Flash Time Between Coats: 10 to 15 minutes at 68 F
  • Drying Time: 3 to 4 hours at 68 F
• The U-POL GUARD#10 Gravi-Gard Stone Chip Protector can also be referred to as stone chip guard aerosol, automotive chip protection coating, textured body panel coating, gray stone guard spray, and underbody stone chip protector.

U-POL specializes in automotive refinishing products including fillers, coatings, aerosols, adhesives, and paint-related products. The company serves professional automotive refinishing markets in more than 100 countries.

Q: Can UP0884 be painted over?
A: Yes. GUARD#10 can be overpainted with most paint systems after drying, with priming or sealing recommended before topcoating for optimum gloss.

Q: How should bare metal be prepared before applying UP0884?
A: Sand bare metal with P180 to P240 abrasive, apply 1 to 2 light coats of ACID#8 Acid Etch Primer Aerosol, and allow 30 minutes before applying GUARD#10.

Q: How many coats of UP0884 should be applied?
A: Apply 1 to 2 coats, allowing 10 to 15 minutes between coats at 68 F.