U-POL UP5023 RAPTOR Acid Etch Primer, 1K Gray Aerosol, 13.2 ounces, 450 ml

U-POL UP5023 RAPTOR Acid Etch Primer, 1K Gray Aerosol, 13.2 ounces, 450 ml

• Phosphoric acid ester primer for preparing bare metal and difficult automotive substrates before refinishing. It etches and primes in one application while creating an anti-corrosive barrier beneath RAPTOR coatings and compatible topcoats.
• Features:
  • Suitable for bare steel, aluminum, galvanized and zinc-coated steel, polyester body fillers, GRP, and fully cured paint.
  • Flat fan high-atomization nozzle produces a broad spray pattern.
  • Apply 2 coats from approximately 10" from the surface.
  • Flash time between coats is 3 to 5 minutes at 68 F.
  • Can be directly topcoated without sanding under normal application conditions.
• Specifications:
  • Manufacturer: U-POL
  • Part Number: UP5023
  • UPC: 501079611079
  • Product Type: 1K acid etch primer aerosol
  • Color: Gray
  • Size: 13.2 ounces
  • Capacity: 450 ml
  • Dry Film Build: 0.6 mil
  • Theoretical Coverage: Approximately 48.4 sq ft per aerosol
  • Dry Sanding: P400 to P600 if required
  • Wet Sanding: P600 to P800 if required
• The U-POL RAPTOR Acid Etch Primer can also be referred to as self etching primer, bare metal primer, automotive etch primer, corrosion resistant primer, and gray aerosol primer.

U-POL manufactures automotive refinishing products including fillers, coatings, aerosols, adhesives, and paint-related products for professional collision repair and refinishing applications.

Q: Can UP5023 be used on aluminum and galvanized steel?
A: Yes. It is suitable for properly prepared aluminum, galvanized steel, and zinc-coated steel.

Q: Does UP5023 need to be sanded before topcoating?
A: Under normal application conditions, it can be directly topcoated without sanding.

Q: How many coats of UP5023 should be applied?
A: Apply 2 coats from approximately 10" from the surface, allowing 3 to 5 minutes between coats at 68 F.