USC 7400-5 Euro Value Clearcoat 4.4 VOC, Medium Solids, 5 Liters

USC 7400-5 Euro Value Clearcoat 4.4 VOC, Medium Solids, 5 Liters

• USC 7400-5 from U.S. Chemical & Plastics is an automotive refinish clearcoat for cost-conscious refinishers seeking a Euro technology finish. It is applied over dried basecoat color and uses three activator speeds for varied temperature conditions.
• Features:
  • System mix ratio is 2 parts USC 7400 Euro Clearcoat to 1 part activator by volume.
  • Compatible activators are USC 7405 Fast, 7415 Medium, and 7425 Slow Activator.
  • Application calls for 2 full coats after basecoat color has dried.
  • Pot life is 2 hours at 72 F / 22 C.
  • Flash between coats is 5 to 10 minutes; dry time to buff is 16 to 24 hours after the last coat at 72 F / 22 C.
• Specifications:
  • Manufacturer: U.S. Chemical & Plastics
  • Part Number: 7400-5
  • MPN: 7400.L05
  • Product Type: Automotive refinish clearcoat
  • Clearcoat System: 7400 Euro Value Clearcoat
  • Capacity: 5 liters
  • Form: Liquid
  • Solids: Medium solids
  • Weight Solids: 38.0%
  • VOC Content: 4.4 pounds per gallon
  • Mix Ratio: 2 parts clearcoat to 1 part activator
  • Compatible Activators: USC 7405 Fast, 7415 Medium, and 7425 Slow Activator
  • Application: 2 full coats over dried basecoat color
  • Pot Life: 2 hours at 72 F / 22 C
  • Flash Between Coats: 5 to 10 minutes at 72 F / 22 C
  • Dry Time to Buff: 16 to 24 hours after the last coat at 72 F / 22 C
  • Bake Time: 40 minutes at 140 F / 60 C
  • Spray Gun Setup: Reduced pressure 1.2mm to 1.5mm; HVLP 1.2mm to 1.4mm
  • Theoretical Coverage: 600 square feet at 1.0 mil
  • Recommended Dried Film Thickness: 2.0 mils
• The Euro Value Clearcoat can also be referred to as automotive clearcoat, Euro clearcoat, 4.4 VOC clear coat, medium solids clearcoat, and 2:1 clearcoat system.

U.S. Chemical & Plastics, or USC, manufactures automotive repair and refinishing products for collision repair professionals. With more than 50 years of experience, the company was the first body filler manufacturer in the U.S.

Q: Which activators are used with USC 7400-5?
A: USC 7400-5 is mixed with USC 7405 Fast, 7415 Medium, or 7425 Slow Activator.

Q: What spray gun setup is specified for this clearcoat?
A: Reduced pressure gun setup is 1.2mm to 1.5mm, and HVLP setup is 1.2mm to 1.4mm.

Q: What is the bake time for this clearcoat system?
A: Bake time is 40 minutes at 140 F / 60 C.