Wivco TH28.000 Shake-N-Break Air Impact Screw Remover, 0.401" Shank Compatible, Includes 4 Phillips Bits

Wivco TH28.000 Shake-N-Break Air Impact Screw Remover, 0.401" Shank Compatible, Includes 4 Phillips Bits

• Wivco TH28.000 is a Shake-N-Break air impact screw remover designed to loosen rusted, corroded, or over tightened screws. Used with a standard 0.401 in shank air hammer, it applies controlled vibration while you turn the handle. The kit includes four 5/16 in hex Phillips bits for common fastener sizes.
• Features:
  • 0.401 in air hammer interface enables use with standard pneumatic hammers found in automotive and industrial shops
  • Vibration assisted action helps break the bond on rusted or painted screws to speed removal and reduce bit cam out
  • Includes four 5/16 in hex Phillips bits (#1, #2, #3, #4) to cover common screw heads without extra purchases
  • Hand controlled turning provides precise torque while the air hammer supplies impact to protect fasteners and tools
  • Intended for use with a standard air hammer; not a replacement part for another SKU
• Includes:
  • Shake-N-Break screw remover tool body
  • Phillips #1 5/16 in hex bit
  • Phillips #2 5/16 in hex bit
  • Phillips #3 5/16 in hex bit
  • Phillips #4 5/16 in hex bit
• Specifications:
  • Manufacturer: Wivco Design, LLC
  • Part Number: TH28.000
  • Drive / Connection Type: Compatible with standard 0.401 in shank air hammers (air hammer not included)
  • Bits Included: Four 5/16 in hex Phillips bits (#1, #2, #3, #4)
  • Packaging Type: Tool with accessory bits
  • Alternate Part Numbers / Cross References: TH28000; WITH28000
  • System Compatibility / Application: Designed to be used on pneumatic air hammers with 0.401 in shanks for removing rusted or over tightened screws; not a replacement part
• The Shake-N-Break Air Impact Screw Remover can also be referred to as air impact screw remover, air hammer screw extractor, vibration screw remover tool, pneumatic screw removal tool, and rusted screw remover.

Wivco Design, LLC manufactures specialty tools and accessories for automotive and industrial service, focusing on problem solving products such as the Shake-N-Break and related components used with pneumatic tools.

Q: Which air hammers will this work with?
A: It is designed for standard 0.401 in shank air hammers. Attach the tool to your air hammer, set low air pressure, and follow the instructions for safe operation.

Q: What bits are included in this kit?
A: Four 5/16 in hex Phillips bits are included in sizes #1, #2, #3, and #4 to cover common screw heads.

Q: Is this a replacement part or an accessory for another SKU?
A: It is a complete screw remover tool that is used with a standard air hammer; it is not a replacement part for another SKU.