3M 01435 Stikit Gold Disc Roll 216U, 6 Inch, P320 Aluminum Oxide, 175-Discs
- The 3M 01435 Stikit Gold Disc Roll 216U is a very fine P320 aluminum oxide disc roll with pressure-sensitive adhesive back; made for finish sanding, featheredging, and final prep over paint, primer, fiberglass, and plastic with minimal scratch and consistent uniform finish.
- Features:
- P320 grit offers a very fine cut ideal for final sanding before primer or for feathering edges.
- Aluminum oxide abrasive that balances good life and cutting speed across various substrates.
- Disc roll format with Stikit™ adhesive back allows discs to be torn off one-at-a-time—improves efficiency and reduces waste.
- A-weight paper backing for flexibility and conforming to curves while sanding without tearing easily.
- Open coat / anti-loading coating helps prevent clogging for longer useful life on sticky surfaces or soft fillers.
- Specifications:
- Part No.: 1435
- Product Line: MMM
- MFR Model: 1435
- Applications: For featheredging, fine featheredge, paint preparation, primer sanding and rough featheredge applications
- Manufacturer: 3M Products
- Alternate Part Number-1: 60455031306
- UPC: 051144014354
- Brand: 3M
- Vacuum (yes/no): No
- Grit: P320
- Grade: Medium
- Abrasive Material: Aluminum Oxide
- Wet/Dry: Dry
- Series: 216U
- Color: Gold
- Backing Material: Paper
- Diameter (in): 6
- Attachment Type: Stikit PSA
- The product can also be referred to as 3M Stikit 1435 disc roll, 3M 216U P320 Stikit Gold disc, 01435 P320 adhesive disc roll, 6-inch PSA sanding disc roll, and 3M Gold P320 finishing roll.
3M’s 01435 Stikit Gold Disc Roll gives finishing shops and body-shops a reliable P320 grit solution with adhesive convenience, consistent uniform finishes, and extended life thanks to its anti-loading and open coat design.
Q: What’s the ideal use case for P320 grit in auto body work?
A: P320 is very fine—ideal for final sanding of primer, feathering edges of existing finish, or preparing surfaces just before top coat to minimize visible scratch patterns. It removes minor imperfections without leaving deep scratches.
Q: What kind of backing or pad works well with these 3M Stikit discs?
A: Use with 3M Stikit™ disc pads or compatible PSA backing pads. For this size (6-inch), suggested backup pads include 3M PN 05546, PN 05556 or PN 05576.
Q: How should the discs be stored and maintained to get full performance?
A: Store in a clean, dry environment; keep temperature moderate to avoid adhesive weakening; avoid pressing dust into adhesive until ready to use; regularly change discs when cutting slows or loading occurs to maintain quality surface finish.
