Magnet Paint UCP99-01 Chassis Saver Rust Preventative Paint Gloss Black, 1 gallon
- Magnet Paint UCP99-01 Chassis Saver is a high-solids, VOC-compliant, single-component coating formulated to stop rust permanently. It bonds to tightly adhered rust, cures via atmospheric moisture, and resists salt, chemicals, oil, and solvent attack without needing primers or topcoats.
- Features:
- Bonds directly to tightly adhered rust with only minimal prep such as wire brushing or scraping.
- High solids formula (77% by weight, 71% by volume) for robust coating performance.
- Glaze-type finish that is rock hard yet flexible, resisting crack, chip, flake or peel.
- Unaffected by road salt, gasoline, diesel, oils, battery acids, solvents, and harsh chemicals.
- No primer or topcoat required single component, moisture-cure system.
- Specifications:
- Manufacturer: Magnet Paint
- Part Number: UCP99-01
- Volume: 1 gallon (liquid)
- Color / Finish: Gloss Black
- Solids Content: 77% by weight, 71% by volume
- Flash Point: 105 °F (41 °C)
- Dry Film Thickness: 3-4 mils total (in two or more coats)
- Estimated Coverage: 569 ft² per gallon at 2 mil dry film thickness
- Surface Compatibility: Suitable for metal chassis, underbody, frame, and structural surfaces; adheres over tightly adhered rust or prepped metal. Bare aluminum requires priming.
- Quantity: single 1-gallon can
- The Magnet Paint UCP99-01 is also known as gloss black chassis coating, rust-arresting underbody paint, single-component rust proof paint, moisture cure chassis enamel, and auto frame protection paint.
Magnet Paint is a specialized coatings company with over a century in rust prevention. Their Chassis Saver line provides durable, high performance underbody protection by bonding to rust and sealing metal surfaces against corrosion and environmental damage.
Q: Can UCP99-01 be applied directly over rusted steel?
A: Yes, It bonds to tightly adhered rust after light preparation (e.g. wire brushing). Do not remove all rust; the coating "bites" into rough rust for adhesion.
Q: Is a primer or topcoat required with Chassis Saver UCP99-01?
A: No, It is designed as a single-component system with no primer or topcoat necessary. For bare aluminum, however, a suitable primer may be needed.
Q: What substrates or conditions reduce its effectiveness?
A: Bare, smooth aluminum does not adhere well; aluminum should be primed first. Also, apply thin coats; excessively thick layers may trap moisture and cause bubbles during curing.
