OTC 1026 Mechanical Grip-O-Matic Puller, 5 Ton, 2/3-Jaw Reversible Jaws
- This OTC 1026 Grip-O-Matic puller is a mechanical 5 ton puller with reversible 2- or 3-jaw configuration; it is designed to remove or install pressed-on parts, bearings, gears etc., offering users a strong, heat-treated forged steel construction and high strength relative to its rated capacity.
- Features:
- Rated for 5 ton capacity capable of heavy-duty pulling tasks without exceeding capacity.
- 2/3-jaw reversible design gives flexibility so you can use either two or three jaws depending on the component shape or clearance.
- Max reach of 3-1/4 inch and max spread of 7 inch lets you pull parts with those dimensional constraints.
- Screw size of 9/16-20 thread with length 6-15/16 inch enables good reach and compatibility with most applications this tool is meant for.
- Jaw dimensions: upper jaw thickness 5/16 inch, lower jaw thickness 1/4 inch; upper width 3/8 inch, lower width 3/4 inch strong jaws suited to take grip without damage.
- Specifications:
- Manufacturer: OTC
- Part Number: 1026
- Capacity: 5 ton
- Jaw Type: 2/3-jaw reversible
- Maximum Reach: 3-1/4 inch
- Maximum Spread: 7 inch
- Screw Thread / Length: 9/16-20 x 6-15/16 inch
- Jaw Thickness: upper 5/16 inch; lower 1/4 inch
- Jaw Width: upper 3/8 inch; lower 3/4 inch
- System Compatibility: Designed for removing or installing gears, bearings, pulleys etc. where 2 or 3 jaw puller configuration is needed; replaces earlier OTC pullers in the Grip-O-Matic puller line.
- The OTC 1026 can also be referred to as OTC 5 Ton puller, OTC 2/3?jaw puller 1026, OTC reversible jaw puller, OTC mechanical puller 5 ton, OTC Grip-O-Matic gear puller.
OTC is a leading hardware and automotive service equipment manufacturer that designs and builds high-quality tools for vehicle diagnostics, lifting, and repair. Known for its innovation and durability
Q: What does "2/3-jaw reversible" mean?
A: It means the puller comes with jaws that can be used in either a two-jaw configuration or a three-jaw configuration and the jaws are reversible so the same jaw can serve as upper or lower depending on job geometry.
Q: What size components will this puller support?
A: It supports parts up to 7 inches across (spread), and can reach up to 3-1/4 inch deep (reach), so ensure your bearing, gear or pulley is within those limits.
Q: Is this puller safe for industrial or automotive use?
A: Yes, when used according to OTC specifications do not exceed rated capacity, ensure jaws grip correctly, align forcing screw properly, inspect for damage before use; forged and heat treated to exceed rated strength.
