SEM 49133 Trim Black Ultra Matte Trim Paint, Jet Black, 20 oz Aerosol
- SEM 49133 Trim Black Ultra is a true jet-black trim paint in matte finish formulated to match OEM trim colors and gloss levels. It is designed for use on plastic, aluminum, steel, and stainless steel surfaces, delivering smooth sprayability and strong adhesion.
- Features:
- True jet-black color with matte gloss level designed for trim and exterior accents.
- Best-in-class appearance and sprayability with ultra transfer efficiency aerosol delivery.
- Designed to adhere to plastics such as TPO, PP, as well as metals like aluminum, steel, and stainless steel.
- Available in three gloss levels (Matte, Satin, Gloss) to match OEM variation.
- Reduces number of coats and time required thanks to superior coverage.
- Specifications:
- Manufacturer: SEM Products
- Part Number: 49133
- Color / Finish: Jet Black, Matte finish
- Container Type: 20 oz aerosol can
- Substrate Compatibility: Plastic (ABS, PVC, similar plastics), aluminum, steel, stainless steel
- Application Instructions: Clean substrate thoroughly; for plastics use scuff pad + adhesion promoter if necessary; apply 1-2 medium wet coats with ~3-5 minutes flash between coats; can temperature ~70°F optimal
- Dry Time / Hardness: Matte finish develops full hardness over approximately 48 hours
- Solids Content: ~ 6.8% (matte version) by product literature
- Quantity: One aerosol can (20 oz net weight)
- The SEM Trim Black Ultra Matte paint can also be referred to as SEM 49133 Matte Trim Paint, OEM Black Matte Trim Finish, SEM Jet Black Trim Paint, Ultra Trim Black Aerosol, and Matte Black Ultra Trim Coating.
SEM Trim Black Ultra 49133 provides a premium finish for trim restoration. Its jet black matte tone, strong adhesion on both plastics and metals, and efficient spray performance make it ideal for achieving OEM-quality trim appearance.
Q: Will this adhere directly to plastic trim without peeling?
A: Yes, provided you clean and scuff the plastic, use Plastic & Leather Prep or equivalent, and apply an adhesion promoter if needed. On ABS or PVC trim, the promoter improves adhesion and finish life.
Q: How many coats are recommended for full coverage?
A: Apply 1 to 2 medium wet coats. Allow about 3-5 minutes flash time between coats for best results.
Q: How long until the surface reaches full hardness?
A: The paint will be dry to the touch sooner, but full hardness is typically reached around 48 hours after application under ideal conditions (70°F, proper prep).
