SEM HR030-LV Low VOC Hot Rod Smoke Kit, 1.5 Quart Kit, 2.8 VOC, 4-1-1 Mix Ratio
- SEM HR030-LV is a Low VOC Hot Rod Smoke matte 2K single stage topcoat kit for accent stripes, hoods, or full vehicles. It provides a smooth, uniform, buff free finish with durability and resistance to chalking and fading. This is a standalone topcoat kit, not a replacement part for another SKU.
- Features:
- Matte 2K single stage system delivers a smooth, uniform, buff free finish for consistent appearance on panels and full resprays.
- Durable, mar resistant film with excellent resistance to chalking and fading helps maintain long term color.
- 2.8 VOC compliant formula meets low VOC requirements while supporting coverage and appearance.
- 4-1-1 mix with dedicated catalyst and reducer simplifies setup and helps ensure repeatable sheen.
- Designed for properly prepped and primed or painted surfaces; this SKU is a complete color kit, not a vehicle specific replacement part.
- Includes:
- Low VOC Hot Rod Smoke Color (HR034-LV), 1 quart
- Low VOC Hot Rod Catalyst (HRC06-LV), 1 half pint
- Low VOC Hot Rod Reducer (HRR06-LV), 1 half pint
- Specifications:
- Manufacturer: SEM
- Part Number: HR030-LV
- Product Type: Low VOC Hot Rod Color Kit, matte 2K single stage topcoat
- Color: Smoke
- Size / Capacity: 1.5 quart kit total
- Mix Ratio by Volume: 4 parts color to 1 part catalyst to 1 part reducer
- Pot Life: 60 minutes at 70 F and 50 percent relative humidity
- Coverage: 248 square feet per gallon at 2 mils
- Flash and Cure: 10 to 15 minutes flash between coats; bake 30 minutes at 160 F or air dry 16 hours
- Spray Setup: 8 to 10 psi at the cap for HVLP or 40 to 45 psi non HVLP; 1.3 to 1.4 nozzle
- VOC Status: Regulatory RTS VOC max 2.72 lb per gal; 2.8 VOC compliant
- System Compatibility or Application: Apply over properly prepped and primed or painted surfaces; do not buff or polish
- The Low VOC Hot Rod Smoke Kit can also be referred to as low VOC hot rod smoke, 2K matte gray topcoat, single stage automotive paint, 1.5 quart paint kit, and 4-1-1 mix automotive paint.
SEM manufactures professional automotive coatings and refinish systems. The Low VOC Hot Rod Smoke kit provides a durable, uniform matte finish with straightforward mixing and application to support consistent results on stripes, panels, and full vehicle topcoats.
Q: What is the correct mix ratio for HR030-LV?
A: Mix 4 parts Low VOC Hot Rod Smoke color with 1 part Low VOC Hot Rod Catalyst and 1 part Low VOC Hot Rod Reducer by volume. Use only the specified catalyst and reducer.
Q: What are typical flash times and cure options?
A: Allow 10 to 15 minutes flash between coats. Bake for 30 minutes at 160 F after a purge period, or air dry for about 16 hours at shop conditions.
Q: Can this finish be buffed or polished to change the sheen?
A: No. Do not buff or polish. For the desired matte appearance, follow the specified mix, spray setup, and flash times, and spray a test panel first.
