Evercoat 100560 Laminating Resin, 1 Gallon
- Evercoat 100560 Laminating Resin is a base-coat polyester resin intended for first-coat lamination in fiberglass repair. It cures with a tacky surface to hold reinforcement cloth or mat in place without needing to sand between layers.
- Features:
- Not a finish coat remains slightly tacky after cure to aid lay-up of subsequent layers.
- Designed for excellent wetting of fiberglass fabric or mat.
- Liquid hardener included for simplified use.
- May be tinted using Evercoat Coloring Agents.
- Specifications:
- Manufacturer: Evercoat (a division of ITW)
- Part Number / SKU: 100560
- Volume: 1 Gallon
- Intended Use: First coat laminating resin for fiberglass repairs
- Substrates: Fiberglass, softwoods (but NOT suitable for oak, cedar, or non-polyester plastics)
- Mixing Ratio: Add MEKP hardener e.g. 12 drops per ounce at ~71-90 °F (varies by temperature)
- Gel Time: 20-30 minutes at ~80 °F (27 °C) (depends on thickness and ambient conditions)
- Finish: Cured surface remains tacky; additional coat or finish coating is needed to obtain a non-tacky, sandable surface.
- Evercoat 100560 also referred to as Evercoat Laminating Resin 100560, Evercoat 100560 Gallon, Evercoat Base-Coat Resin, Evercoat Polyester Laminating Resin 1 Gal.
Evercoat is a leading manufacturer of high-performance body repair products, specializing in premium fillers, putties, adhesives, and coatings designed for professional automotive, marine, and industrial applications.
Q: What does "Set of 4" mean in some listings?
A: Some sellers ship this product in a case pack of four 1-gallon units. The description here is for one gallon; adjust title or includes if selling the full pack.
Q: Can this resin be used as a final surface coat?
A: No, Evercoat’s documentation states this is not a finish coat it remains tacky and is intended only for lamination layers.
Q: Is sanding required between layers?
A: No, because it cures tacky, the resin does not require sanding between layers when used in lamination builds.
