Dominion Sure Seal BEZLG EZ Liner Bedliner & Industrial Strength Coating - 1 Gallon Kit
- This Dominion Sure Seal BEZLG EZ Liner kit is a 3-part moisture-cure urethane coating system designed for spray-on, roll-on or brush-on application to truck beds, metals, plastics, fiberglass, concrete and wood, offering anti-skid surface and durable protection.
- Features:
- Excellent adhesion to a wide variety of substrates including truck beds, metal, plastics, wood and fiberglass.
- Low-odor, non-flammable, non-toxic formulation suitable for professional or DIY refinishing environments.
- Flexible urethane finish remains serviceable under vehicle bed conditions, steps, patio floors or industrial surfaces.
- Simplified application: mix the components, add the accelerator drop-by-drop to control work time, and apply one coat (100-120 sq ft coverage per kit at ~10-12 mils wet film thickness) according to the technical data sheet.
- Includes:
- Part A: Black base resin (gallon size, approx. 3.78 L / 1 US gallon)
- Part B: Black polymer resin component (bundled with Part A in the same kit)
- Part C: Light yellow accelerator bottle (dropper style)
- Specifications:
- Manufacturer: Dominion Sure Seal Ltd.
- Part Number: BEZLG (Kit: Stock code 100105)
- Volume: 1 US gallon kit (3.78 L) consisting of Parts A, B and C
- Coverage: Approximately 100-120 sq ft per kit at 10-12 mils wet film thickness
- Finish/Color: Black (applied finish), anti-skid texture achievable via added aggregate
- Application Method: Spray gun, roller or brush
- VOC: Less than 10 g/L ready-to-use (as per TDS)
- Application/Compatibility: Ideal for full-size pickup truck beds or industrial floor/step coatings using professional refinishing practices.
- This kit may also be referred to as Dominion Sure Seal EZ Liner BEZLG 3-Part Bedliner Kit, Dominion Sure Seal 100105 EZ Liner Kit, or Dominion Sure Seal BEZLG Bedliner & Industrial Strength Coating.
The Dominion Sure Seal BEZLG is a professional-grade spray-on bedliner system designed for high-adhesion, durable anti-skid coating applications in automotive or industrial refinishing, provided as a full 3-component kit for one complete job.
Q: How should I prepare and apply the BEZLG kit?
A: Clean the surface thoroughly with wax & grease remover, remove loose paint or rust, sand down to clean substrate, blow off and clean again. Mix Part B into Part A, add up to 24 drops of Part C accelerator per kit depending on ambient temperature, mix vigorously for 5 minutes and apply with spray gun (40-60 psi), roller or brush. One coat covers approx. 100-120 sq ft; allow flash time 30-60 minutes between coats if applying two coats.
Q: What is the work time or cure time for this coating?
A: At 72 °F (~22 °C), with no drops of Part C accelerator you have over 1 hour work time, tack-free in about 8-9 hours. With 24 drops of accelerator you have about 50 minutes work time and tack-free in 4-5 hours. Light-duty use can begin in approx. 2 days, full service in 3-7 days.
Q: Can I use this kit for smaller applications like steps or garage floors?
A: Yes; although the kit is sized to cover one average full-size truck bed, the formula’s adhesion and flexibility also make it suitable for steps, patio floors or garage surfaces-just ensure proper surface prep and film build per the technical data sheet.
