Polyvance 3601-1 Bumper & Cladding Coat Adhesion Primer, 1 Gallon Can, Medium Viscosity Pourable Liquid, Light Gray
- The Polyvance 3601-1 LT Gray Bumper and Cladding Adhesion Primer is a one-component adhesion promoter designed for TPO and polypropylene automotive plastics, allowing direct spray of base and clear systems without sanding.
- Features:
- Adheres to raw, unsanded TPO without scuffing or sanding
- Ready-to-spray 1K formulation; no reducer or activator needed
- Fast drying: 60 minutes at 72 F or 15 minutes at 130 F
- Film build per coat: 0.03-0.05 mil (8-12 microns)
- Compatible with most urethane and polyester base and clear topcoat systems; avoid catalyzed basecoats, single stage urethane, 2K primers or sealers
- Specifications:
- Manufacturer: Polyvance
- Part Number: 3601-1
- Color / Finish: Light Gray
- Container Size: 1 gallon
- Dry Time: 60 minutes at 72 F; 15 minutes at 130 F
- No thinning required; may be thinned up to 5 percent with lacquer thinner if needed
- VOC (ready to spray): 6.3 lb/gal (755 g/L)
- Substrate Compatibility: optimized for TPO and polypropylene plastics; adhesion guaranteed to raw TPO
- The Polyvance 3601-1 LT Gray Adhesion Primer can also be referred to as Polyvance Bumper and Cladding Adhesion Primer 3601-1, 3601 adhesion primer, LT Gray 3601, Bumper and Cladding Coat 3601, and 3601-1 adhesion promoter.
Polyvance Bumper and Cladding Adhesion Primer provides a robust surface promoter for plastic body panels, engineered to bond base and clear coatings directly to TPO without additional prep steps.
Q: Do I need to sand TPO before applying this primer?
A: No. For raw TPO surfaces, this primer adheres directly without sanding or scuffing. For used or OEM primed parts, light scuffing may improve adhesion.
Q: Can I topcoat immediately?
A: Once the primer is fully dry, typically 60 minutes at 72 F or 15 minutes at 130 F, you can topcoat with compatible base and clear systems.
Q: Which topcoat systems are compatible?
A: It is compatible with most urethane and polyester base and clear paint systems. Avoid catalyzed basecoats, single stage urethane, 2K primer surfacers, or 2K sealers as they may reduce adhesion.
