Sure Shot B8000PL Model B Aluminum Atomizer Sprayer, 16 oz.
- Sure Shot 16 oz. Aluminum Atomizer Sprayer (B8000PL) by Milwaukee Sprayer. Sure Shot sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. They use readily available compressed air, instead of flammable or dangerous propellants, and because they are reusable you don't have to worry about disposal of empty cans. All Sure Shot sprayers have a max pressure of 200 psi.
- Features:
- Aluminum canister with red powder-coated exterior provides durability and corrosion resistance for rugged shop use
- Viton® seals standard to resist chemical degradation and maintain leak-free performance with many solvents and cleaners
- Includes an assortment of nozzles: fine, regular, medium, coarse, plus pin stream to control spray pattern precisely (2 Fine, 2 Regular, 2 Medium, 2 Coarse and 1 Pin Stream Nozzle)
- Operates under compressed air with working pressure from ~80 psi up to a maximum of 200 psi for full spray capacity and even application
- Specifications:
- Manufacturer: Sure Shot / Milwaukee Sprayer
- Part Number: B8000PL
- Capacity: 16 ounce (canister volume)
- Body Material: Powder-coated aluminum with plastic top
- Seals: Viton® (standard) with compatibility for other material seals if needed
- Nozzles Included: 2 fine, 2 regular, 2 medium, 2 coarse, 1 pin stream + straw extension
- Working Pressure: 80-150 psi typical; maximum 200 psi
- Not recommended for paint or for use with acids or chemicals that etch metal surfaces
- Country of Origin: United States
- The Sure Shot Model B 16 ounce sprayer B8000PL can also be referred to as Sure Shot atomizer sprayer, Milwaukee Sprayer B8000PL, refillable air sprayer 16 oz, solvent/water-based sprayer, and bulk chemical sprayer non-aerosol.
Sure Shot B8000PL is a heavy-duty, refillable spray atomizer engineered for trades and shops needing precise, economical application of liquids. With its aluminum body, Viton seals, and multiple nozzle options, it gives control, chemical compatibility, and long service life without the cost or environmental impact of disposable aerosol cans.
Q: What types of fluids can I use in this sprayer?
A: It is compatible with most light oils, cleaners, degreasers, and solvents (solvent-based or water-based) that do not attack aluminum or Viton. It is *not* recommended for paints or acids. Always check chemical compatibility before use.
Q: What pressure is required to operate it properly?
A: For full use of the 16 ounce capacity and even spray, compressed air of around 80 psi is required. Maximum pressure should not exceed 200 psi to avoid damage or safety hazards.
Q: How do I maintain the sprayer to ensure long life?
A: After use, depressurize before disassembly, clean all parts especially nozzles and valve assemblies, replace seals or valves if worn or leaking, use proper nozzles for the desired spray pattern, and store dry to prevent corrosion. Use Viton or compatible O-rings if spraying chemicals that degrade standard seals.
