USC Duraglas 24035 Fiberglass Reinforced Body Filler Quart
- The U.S. Chemical & Plastics 24035 USC Duraglas Fiberglass Reinforced Body Filler is a short-strand fiberglass filler formulated for repairing rust outs, holes, tears, and cracks in metal, fiberglass, wood, masonry, or concrete panels; it includes the cream hardener and delivers waterproof durability.
- Features:
- Short-strand fiberglass reinforcement for superior strength over ordinary fillers; helps resist cracking and improve durability.
- Waterproof above and below the water line when properly top coated; suitable for marine as well as automotive uses.
- Included white cream hardener enables proper mix ratio (approximately 2 percent by weight or 50:1) for reliable cure and performance.
- Fast curing gel time at about 3-5 minutes at 77 degrees Fahrenheit; sands in about 15-20 minutes for efficient workflow.
- Specifications:
- Body Filler
- Container Type: Can
- Finish Appearance: Blue-Green
- Container Capacity: 25.6 Fl Oz
- Temperature Rating: 65 Deg
- Applications: Steel, Aluminum, Fiberglass, Concrete, Masonry, Wood
- Physical State: Liquid
- Voc Content: 242 Grams per Liter (Packaged), 2 Grams per Liter (Applied)
- Viscosity at 77 Deg F: 220000 CPS
- Maximum Recommended Thickness: 1/4 Inch
- Gel Time at 77 Deg F: 3 to 5 Minute
- Sanding Time at 77 Deg F: 15 to 20 Minutes
- Boiling Point: 145 Deg C
- Flash Point: 29 Deg C
- Vapor Density: 3.6
- Vapor Pressure: 0.57 Kilopascal
- Details:
- Order Part Number: US24035
- Item Description: Duraglas Fiberglass Reinforced Body Filler, 1 Quart
- Manufacturer: U.S. Chemical & Plastics
- Manufacturer Part Number: 24035
- Default Selling Unit: EA
- Part Number 24035, UNSPSC: 13111000, Valspar 448833
- The USC Duraglas 24035 Fiberglass Reinforced Body Filler can also be referred to as USC 24035, Duraglas body filler, fiberglass reinforced body filler, short-strand fiberglass filled filler, and rust repair filler.
US Chemical & Plastics USC Duraglas 24035 is a professional-grade fiberglass reinforced body filler designed for demanding repair applications. It combines resin and chopped fiberglass fiber to deliver outstanding strength and waterproofing, ideal for automotive, marine, and structural patch work.
Q: What surfaces is Duraglas 24035 compatible with?
A: It works on steel, aluminum, fiberglass, wood, masonry, and concrete; for large hole repair use with fiberglass cloth for added support.
Q: How should I mix and apply Duraglas 24035 for best results?
A: Bring both filler and hardener to at least 65 degrees Fahrenheit; mix about 2 percent hardener by weight (roughly a 50:1 ratio); apply to clean, prepared surface; allow cure then sand, featheredge, and topcoat as needed.
Q: What safety precautions should be taken when using this product?
A: Use in well ventilated area; avoid inhaling fumes or dust; wear gloves, protective clothing, respirator when sanding; store away from ignition sources; read SDS for full information.
