Viledon 561-030 PA/560 G-10 Celling Filter Linked Panel, 20" W x 1.06" D x 48" H, 10 Pack
- The Viledon 561-030 PA/560 G-10 ceiling filter panel is engineered for final intake air filtration in spray booths, delivering high particle capture and smooth airflow with its progressively structured synthetic media.
- Features:
- High efficiency on particles greater than10 micron (100 %) and ~99 % at 5 micron — protects paint finish from contamination
- Actively adhesive fiber surface — permanently retains particles already captured for consistent performance over life
- Reinforcing scrim on clean air side — improves stability and resists damage during installation
- Self-extinguishing media and solvent vapor resistance — suitable for harsh spray shop environments
- Includes:
- 10 × Viledon 561-030 PA/560 G-10 ceiling filter panels (20 in × 48 in × 1.06 in)
- Specifications:
- Manufacturer: Viledon / Freudenberg Filtration Technologies
- Part Number: 561-030
- Panel Dimensions: 20 in W × 1.06 in D × 48 in H
- Media Type: PA/560 G-10 synthetic nonwoven with adhesive treatment
- Filter Class: M5 per EN 779:2012, ISO ePM10 65 %
- Initial Pressure Drop (nominal velocity) ~68 Pa at 0.5 m/s
- Temperature Resistance: continuous 212 °F, peaks 250 °F
- Dust Holding Capacity: 660 g/m² (AC fine / 300 Pa)
- The ceiling filter panel can also be referred to as paint booth ceiling filter, intake air diffusion panel, PA/560 G-10 filter panel, high efficiency booth filter, and spray booth ceiling intake filter.
Viledon’s 561-030 ceiling filter panels utilize the PA/560 G-10 media to deliver highly reliable particulate capture in paint spray booths, combining efficient airflow, strong dust retention, and structural stability for demanding finishing environments.
Q: What level of particle filtration does this media achieve?
A: The PA/560 G-10 media delivers nearly 100 % efficiency on particles above 10 microns and around 99 % efficiency at 5 microns, helping protect coated surfaces from visual defects.
Q: What is the expected pressure drop and operating conditions?
A: At a nominal media velocity of 0.5 m/s, the initial pressure drop is approximately 68 Pa. The media tolerates continuous temperatures up to 212 °F, with short peaks to 250 °F.
Q: Why is the adhesive fiber treatment important?
A: The active adhesive treatment on each fiber ensures particles already captured remain held throughout the filter's service life, reducing migration and maintaining performance.
