Overview
CTA 2365 3-Valve Ford Triton Spark Plug Extractor Kit
CTA 2365 3-Valve Ford Triton Spark Plug Extractor Kit
- Extracts broken-off spark plug sleeves in ’04 – ’08 (4.6, 5.4 and 6.8 engines)
- Includes:
- 8” /20 cm high-speed steel tap
- Extractor
- Guide
- Washer
- Jam nut and rubber caps to prevent thread chips from entering cylinder bore
- May be used with #2364
- Interchange: 65600, 391-200, 391-22A, 391-300, 391-250, 391-400, 391-900, and 391-160
- The spark plug will break in 1 of 2 modes:
- Mode 1: The ground electrode shield is left behind as an empty shell.
- Mode 2: The porcelain center and ground electrode shield is left behind. In this case, soak with penetrating oil and use long reach needle nose pliers to firmly grasp and remove the porcelain center from the ground electrode shield.
- Removal Instructions:
- Seat the stopper cap using a long drill bit or suitable wire sized for the internal diameter of the cap. Make sure the cap is bottomed out against the electrode strap. This will prevent thread shavings from entering cylinder bore.
- Place the guide into the spark plug well.