CTA Tools 8084 Power Steering Pump and Alternator Pulley Remover and Installer Kit, 3/8"-16 Threaded Shaft Applications

CTA Tools 8084 Power Steering Pump and Alternator Pulley Remover and Installer Kit, 3/8"-16 Threaded Shaft Applications

• The CTA Tools 8084 Power Steering Pump and Alternator Pulley Remover and Installer Kit is designed to remove and install press on belt driven accessory pulleys on pumps with 3/8"-16 threaded shafts. This impact quality kit supports service on a wide range of domestic engines including GM Quad 4, GM 3.1L, and Ford 4.6L applications.
• Features:
  • Removes and installs press on type belt driven accessory pulleys for power steering pumps and alternators with 3/8"-16 threaded shafts.
  • Interchangeable installer adapters support GM Quad 4, GM 3.1L, and Ford 4.6L engines for expanded domestic vehicle coverage.
  • Impact quality construction provides durability for demanding automotive service environments.
  • Packaged in a blow mold case to keep components organized and protected.
• Includes:
  • 8084X03 Installer Quad 4
  • 8084X04 Installer GM 3.1L
  • 8084X05 Installation Nut
  • 8084X06 Installer 3/8-16
  • 8084X07 Installer Ford 4.6L
  • 8084X08 Universal Remover Pin
  • 8084X10 Threaded Shaft
• Specifications:
  • Manufacturer: CTA Tools
  • Part Number: 8084
  • MPN: 8084
  • Product Type: Power Steering Pump and Alternator Pulley Remover and Installer Kit
  • Drive and Connection Type: 3/8"-16 Threaded Shaft Applications
  • Packaging Type: Blow Mold Case
  • Interchange: 38850, W89708, 4530, 25298
  • System Compatibility or Application: Designed to remove and install press on belt driven accessory pulleys on power steering pumps and alternators with 3/8"-16 threaded shafts, including GM Quad 4, GM 3.1L, and Ford 4.6L engines.
• Instructions:
  • REMOVAL INSTRUCTIONS:
    • Screw the threaded shaft into the removal housing, then insert proper removal pin into the hollow end of the shaft.
    • Engage the removal housing onto the recessed groove of the pulley.
    • Using a 3/4” wrench or socket, turn the threaded shaft clockwise until the pulley is removed (hold the removal housing/pulley stationary).
  • INSTALLATION INSTRUCTIONS:
    • Thread the proper installation nut all the way on the threaded shaft.
    • Slide on the first washer, then the thrust bearing, then the second washer.
    • Screw the proper threaded installing adapter into the threaded shaft.
    • Slide the pulley on the threaded shaft.
    • Screw the small end of the threaded shaft into the pump or alternator shaft hole all the way.
    • Using a 15/16” deep socket, rotate the installation nut clockwise to force the pulley onto the pump or alternator shaft (hold the pulley stationary).
• The Power Steering Pump and Alternator Pulley Remover and Installer Kit can also be referred to as power steering pulley puller tool, alternator pulley installer kit, 3/8-16 pulley remover set, GM pulley service tool, and Ford 4.6L pulley installer.

CTA Tools is a manufacturer of specialty automotive service tools designed for professional technicians and serious DIY users. The company develops durable, application specific tools for engine, steering, and accessory drive system maintenance.

Q: What types of pulleys does the CTA 8084 service?
A: The kit is designed to remove and install press on type belt driven accessory pulleys used on power steering pumps and alternators with 3/8"-16 threaded shafts.

Q: Which engines are supported by the included adapters?
A: The kit includes installer adapters for GM Quad 4, GM 3.1L, Ford 4.6L, and other compatible domestic applications using 3/8"-16 threaded shafts.

Q: Is this tool suitable for impact use?
A: Yes, the CTA 8084 is described as impact quality and built for durability in professional automotive service environments.