EVERCOAT SPOT-LITE 100446 Premium Lightweight Polyester Finishing and Spot Putty, 1/2 Gallon (3.3 lbs)

EVERCOAT SPOT-LITE 100446 Premium Lightweight Polyester Finishing and Spot Putty, 1/2 Gallon (3.3 lbs)

• The Evercoat 446 is the SPOT-LITE finishing and spot putty from Evercoat (part number 100446), a lightweight, paste putty that flows like a pourable putty and is used for quick spot repairs and finishing in automotive bodywork.
• Features:
  • Contains Hattonite filler for improved sandability and smoother finish when sanding.
  • Cures quickly to a sandable state approximately 10-15 minutes set time at 72 °F (22 °C).
  • Stain resistant, so it can be used under basecoat/clearcoat repairs without discoloration or bleed-through.
  • Suitable for use on galvanized metal, aluminum, bare steel, body filler, two-part primers, and sanded OEM finishes.
  • Can fill minor damage up to 1/8 inch (3 mm) in depth before sanding.
• Specifications:
  • Manufacturer: Evercoat
  • Part Number: 100446
  • Container size: 1/2 gallon (net content in putty form)
  • Part No.: 446, 100446
  • Standard/Approvals: California Pro65 Warning: Cancer | GHS and OSHA Hazards
  • Includes: Blue Cream Hardener
  • Applications: For steel, fiberglass, galvanized steel, most rigid to semi-rigid plastics substrates
  • Trade Mark: SPOT-LITE™
  • UPC: 023289004460
  • Brand: EVERCOAT
  • Color: White
  • Mixing Ratio: 2% Hardener
  • Type: Lightweight Premium
  • Container Size (gal): 0.5
  • Form: Paste
  • Container Type: Can
• Evercoat 446 also referred to as Evercoat Spot-Lite putty ½ gal, lightweight finishing putty 100446, MetalWorks finishing & spot putty, pourable spot filler putty with hardener included.

Evercoat provides this Spot-Lite premium lightweight finishing and spot putty as a fast-curing, easily sandable and stain-resistant filler designed for quick spot repair and finishing tasks on automotive surfaces, including OEM and primer surfaces.

Q: What is the approximate curing time before it is sandable?
A: It cures in roughly 10 to 15 minutes at 72 °F (22 °C) before it is ready to sand.

Q: What surfaces can this putty be applied on?
A: It can be used on galvanized metal, aluminum, bare steel, existing body filler, two-part primers, and properly prepared OEM finishes.

Q: How much damage can it fill before sanding?
A: You can use it to fill minor damage up to about 1/8 inch (3 mm) in depth, then sand it smooth.