Home » Facility » Paint Booth » Paint Booth Coatings
 
 
DeVilbiss 803668 Booth Wall Coat Water-Based Booth Wall Coating, 1 Gallon DeVilbiss DEV.803668
View Larger

DeVilbiss 803668 Booth Wall Coat Water-Based Booth Wall Coating, 1 Gallon

Item # DEV.803668
$203.40
Quantity:      On Hand: 18QTY_CHECK:18-net:-DB:18-VSTOCK:0  Sold As: each
 
 
DeVilbiss
More Products from DeVilbiss
 
  Add to Shopping List
  Save For Later
 

Overview

 

DeVilbiss 803668 Booth Wall Coat Water-Based Booth Wall Coating, 1 Gallon

  • The DeVilbiss 803668 Booth Wall Coat from DeVilbiss, part number 803668, a water-based protective coating designed for spray booths and similar finishing environments.
  • Features:
    • Formulated as a clear or white film that protects walls, lights, fixtures and surfaces in spray booths from paint and primer overspray.
    • Low volatile organic compound (VOC) content, approx. 4 grams per liter, making it more compliant with finishing environment regulations.
    • Viscosity in the range of 1000 to 1200 cP (centipoise) for spray application.
    • Peelable after bake cycles or extended use; advertised as durable through up to 500 bake cycles or about six months of service under typical use.
  • Specifications:
    • Manufacturer: DeVilbiss
    • Part Number: 803668
    • Form / packaging: 1 gallon liquid coating
    • Base: water-based formula including proprietary polymers, water, some organic compounds including triethyleneglycol bis(2-ethyl hexanoate), and titanium dioxide as pigment.
    • Specific gravity: 1.08 g/cu-cm.
    • pH range: about 5 to 8.
  • DeVilbiss 803668 Booth Wall Coat can also be referred to as DeVilbiss booth wall coating gallon, booth wall coat 1 gal, overspray protective booth coating, spray booth wall protect coat 803668.

 

DeVilbiss manufactures this booth wall coating to help finishers maintain clean, bright spray booth environments by forming a protective film that resists overspray and is removable after extended use or bake cycles.

 

Q: What surfaces is this coating intended for?
A: It is intended for use on painted or galvanized metal surfaces in spray booths or finishing booths to protect walls, lights, and fixtures from overspray.

 

Q: How durable is the coating?
A: It is claimed to last up to about 500 bake cycles or approximately six months of use under typical finishing or paint booth operation.

 

Q: What are the application characteristics?
A: It is a water-based liquid with viscosity around 1000-1200 cP, spray applied, with a low VOC content (4 g/L) and pH between about 5 and 8.