S & H Industries ALC 40004 Deadman Abrasive Pressure Blaster, 150 Pound Capacity

S & H Industries ALC 40004 Deadman Abrasive Pressure Blaster, 150 Pound Capacity

• The ALC 150 Lb. Capacity Abrasive Blaster with Deadman Control System is a heavy duty sandblaster used for sandblasting, bead blasting or abrasive blasting.
• Features
  • Manual pull up tank closure
  • Adjustable abrasive flow valve
  • Pressure relief valve - 125 PSI
  • Pressure gauge
  • Pressure relieving ball valve
  • Blast hood with bump hat
  • Wheels - 8 Inch
  • Welded steel frame
  • ASME certified tank
  • Approximate capacity 150 Pound
  • Automatic shut off if handle is dropped
  • Abrasive flow is sealed at nozzle end by square sealing block
  • Abrasive hose remains pressurized
  • Full control of blasting at the handle
  • Heavy-duty design, few wear components, economical
• Specifications
  • Shipping Weight: 76 lbs. (2 pieces)
  • Ship UPS: Yes
  • Blast Time: 45-60 Min.
  • Hose Size: 1/2" ID x 15'
  • Ceramic Nozzle Size: 2 ea. - 1/8", 1 ea. - 5/32"
  • Hood: 40024
  • Moisture Separator: 40207
  • Air Pressure: 80-125 psi
  • Minimum Air Volume: 7 CFM @ 80 psi
  • Height: 37"
  • Tank Dimensions: 12" x 27"
  • Tank Volume: 1.5 cu. ft.
  • Approx. Abrasive Capacity: 150 lbs.
  • ASME Certified: Yes
  • Made in USA
  • UPC 746340400048
• S & H Industries 40004 ALC Deadman Abrasive Pressure Blaster is used for sandblasting, bead blasting or abrasive blasting. An abrasive blaster works on the principle of high pressure compressed air being used to force a mix of air and fine abrasive through a nozzle. The abrasive particles will quickly remove paint, rust, corrosion, dirt, and discoloration from many different types of surfaces. Just as there are many surfaces to be cleaned there are many different types of abrasive materials that can be used:
  • Coal Slag
    • Used to remove rust, paint and scale from steel
    • Fast cutting and will not collect moisture
    • Economical
  • Steel Grit
    • Used to remove rust, paint and scale from steel
    • Fast cutting
    • Leaves a smooth finish
  • Silicone Carbide
    • Used to remove paint and rust
    • Stays sharper longer
    • Popular for glass etching
    • Is generally used in reclaim systems or blast cabinets
  • Glass Bead
    • Used in general cleaning
    • A very fine materials
    • Is generally used in reclaim systems or blast cabinets
    • Leaves a satin or matte finish
  • Aluminum Oxide
    • Used in paint removal and general cleaning
    • Is sharper than glass bead and stays sharper longer
    • Is generally used in reclaim systems or blast cabinets
    • Used in glass etching
  • Walnut Shells
    • Used in cleaning and paint removal on delicate surfaces such as wood
    • Great for removing carbon or paint from aluminum
    • Leaves a very smooth finish
    • Is generally used in reclaim systems or blast cabinets
  • Plastic Grit
    • Used for removing paint without damaging soft surfaces such as fiberglass
    • Very low dust
    • Used on aircraft parts and boat parts
    • Is generally used in a reclaim system or blast cabinet
  • Corn Cob
    • Used in cleaning delicate surfaces
    • Popular with the wood crafter
    • Used in cleaning stone and glass