Polyvance 3602-4 Bumper and Cladding Coat Adhesion Primer, Medium Viscosity Pourable Liquid, Dark Gray, 1 Quart

Polyvance 3602-4 Bumper and Cladding Coat Adhesion Primer, Medium Viscosity Pourable Liquid, Dark Gray, 1 Quart

• Bumper and Cladding Adhesion Primer is an advanced solvent based coating designed to permanently stick to the bumpers, side cladding, and trim found on many of today's cars, trucks, and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper and Cladding Adhesion Primer WILL stick to raw TPO and polypropylene. Once the primer is on, your basecoat clearcoat will stick.
• Features
  • Sticks to smooth or textured TPO plastics
  • Ideal for easy refinishing of new, unprimed OEM replacement bumpers from Toyota, Nissan, Kia, Subaru, etc..,
  • No sweat! Quit sweating your bumpers in the paint booth
  • No need to clean, sweat, re-clean, and so on; Sticks to TPO plastic without sanding or scuffing
  • Just clean the bumper with our 1000 Super Clean plastic cleaner and shoot the Bumper and Cladding Adhesion Primer on
  • Simple, ready-to-spray, 1K formulation means there's no waste
  • What you don't use, pour back into the can
  • Compatible with most urethane and polyester-based base-clear topcoat systems
  • Bumper and Cladding Adhesion Primer does not have to be scuffed or sanded prior to top coating, and it may be top coated at any time after application
  • A proven labor-saver since its introduction in 2003
• Specifications
  • Adhesion Primer
  • Container Capacity: 1 Quart
  • Color/Shade: Dark Gray
  • Drying Time: 60 Minute at 72 Deg F/15 Minute at 130 Deg F
  • Overall Dimension: 4.2 Inch Diameter x 4.8 Inch Height
  • Nozzle Size: 0.8 to 1.3 Millimeter
  • Spray Temperature: 50 to 90 Deg F
  • Density: 7.3 Pound/Gallon
  • VOC: 6.3 Pound/Gallon
  • Flash Point: 44 F
  • Specific Gravity: 0.924
  • Part Number: 3602-4
  • UNSPSC: 31211500
• Applications
  • Bumper/Cladding
  • The first step is to identify the bumper to make sure it’s raw polypropylene.
  • Then you’ll prep the bumper by cleaning it with one of Polyvance’s approved plastic cleaners.
  • Spray the Bumper & Cladding Adhesion Primer on the surface and let it dry completely.
  • Finally, apply your color using an approved topcoat system.
  • HAZMAT FEE WILL APPLY