Motor Guard MHT-7000 High Tech Series Air Filtration System, 1/2" NPT Inlet x 3/8" NPT Outlet, 30 scfm, 0.01 micron
Motor Guard MHT-7000 High Tech Series Air Filtration System, 1/2" NPT Inlet x 3/8" NPT Outlet, 30 scfm, 0.01 micron
- Motor Guard introduces the most advanced air preparation system for spray booths and critical refinishing operations. The Motor Guard High Tech Air Preparation System (MHT-7000) offers six stages of air prep in a single unit and provides for the quickest, cleanest cartridge change in the industry. The MHT-7000 High Tech Air Filtration System is the latest addition to a full line of repair and refinishing products. From Pulling to Painting, Motor Guard has a product for all of your auto body repair and refinishing needs.
- Features:
- Six-stage filtration including water separation, depth particulate/oil/water aerosols, pre-filter, activated carbon, silica gel desiccant, and final desiccant dust filtration to ensure air quality.
- Stage 1 - centrifugal water separator traps condensed moisture
- Stage 2 - hydrophilic depth cartridge traps particulates, water, and oil aerosols
- Stage 3 - sintered polypropylene pre-filter
- Stage 4 - activated carbon filter traps oil vapor to <0.003 ppm
- Stage 5 - silica gel desiccant dryer dries air to -40 deg F dew point
- Stage 6 - final filter media traps desiccant dust
- Filtration to 0.01 micron for particulates and <0.003 ppm for oil vapor to protect paint finish and equipment.
- Desiccant dryer delivers a −40°F dew point, with 2 quarts of silica gel beads; sight glass color change alerts when cartridges need replacing.
- True diaphragm regulator with gauge; outlet pressure range 2-125 PSI; maximum inlet pressure 125 PSIG; built-in locking knob to prevent accidental adjustment.
- 1/2 NPT inlet, 3/8 NPT outlet; capable of nominal 30 SCFM airflow; operating temperature range 40-120°F; 16-ounce bowl capacity.
- Includes:
- MHT-7100 Sub-micronic compressed air filter and water trap
- MHT-7200 Silica gel desiccant dryer with activated carbon element
- MHT-7300 Precision diaphragm regulator with gauge
- Specifications:
- Part No.: MHT-7000
- Product Line: MTG
- MFR Model: MHT-7000
- Applications: For spray booths and critical refinishing operations
- Manufacturer: Motor Guard Corporation (Optima)
- Brand: Motor Guard
- Overall Height (in): 15
- Pressure Rating (psi): 2 to 125
- Filter Rating: 0.01 micron
- Port Size: 1/2 in NPT Inlet x 3/8 in NPT Outlet
- Made in USA
- The Motor Guard MHT-7000 High Tech Air Preparation System can also be referred to as high stage air filter regulator system, six stage air prep unit, desiccant dryer regulator combo, spray booth air prep system, advanced compressed air filter regulator.
Motor Guard makes the MHT-7000 High Tech Air Preparation System for professional auto body and paint-refinishing use; this system combines filtration, drying, and regulation in a single unit to ensure compressed air is clean, dry, and properly regulated for high quality finishes.
Q: What makes the six stages of air preparation in the MHT-7000 better than standard air filter/regulator units?
A: The MHT-7000 includes a full progression from moisture separation to fine particulate filtration (.01 micron), oil vapor removal (< .003 ppm), desiccant drying to −40°F dew point, and a final filter media to trap dust; this protects finishes and reduces defects in spray applications.
Q: What are the maintenance requirements for the MHT-7000?
A: Replace the drop-in filter cartridge (M-710) in the water trap and hydrophilic cartridge when flow is reduced; replace the desiccant and activated carbon cartridge (M-720) when the sight glass changes color; regularly drain moisture bowl; check regulator for stable pressure.
Q: What installation conditions are required for proper performance?
A: Install with at least 20 feet of supply line between the compressor and the unit; use rigid mounting; ensure correct NPT connections; maintain ambient temperature in the 40-120°F range; do not exceed maximum inlet pressure of 125 PSIG.
