Magnet Paint UCP99-01 Chassis Saver Rust Preventative Paint Gloss Black, 1 gallon

Magnet Paint UCP99-01 Chassis Saver Rust Preventative Paint Gloss Black, 1 gallon

• Magnet Paint UCP99-01 Chassis Saver is a high-solids, VOC-compliant, single-component coating formulated to stop rust permanently. It bonds to tightly adhered rust, cures via atmospheric moisture, and resists salt, chemicals, oil, and solvent attack without needing primers or topcoats.
• Features:
  • Bonds directly to tightly adhered rust with only minimal prep such as wire brushing or scraping.
  • High solids formula (77% by weight, 71% by volume) for robust coating performance.
  • Glaze-type finish that is rock hard yet flexible, resisting crack, chip, flake or peel.
  • Unaffected by road salt, gasoline, diesel, oils, battery acids, solvents, and harsh chemicals.
  • No primer or topcoat required single component, moisture-cure system.
• Specifications:
  • Manufacturer: Magnet Paint
  • Part Number: UCP99-01
  • Volume: 1 gallon (liquid)
  • Color / Finish: Gloss Black
  • Solids Content: 77% by weight, 71% by volume
  • Flash Point: 105 °F (41 °C)
  • Dry Film Thickness: 3-4 mils total (in two or more coats)
  • Estimated Coverage: 569 ft² per gallon at 2 mil dry film thickness
  • Surface Compatibility: Suitable for metal chassis, underbody, frame, and structural surfaces; adheres over tightly adhered rust or prepped metal. Bare aluminum requires priming.
  • Quantity: single 1-gallon can
• The Magnet Paint UCP99-01 is also known as gloss black chassis coating, rust-arresting underbody paint, single-component rust proof paint, moisture cure chassis enamel, and auto frame protection paint.

Magnet Paint is a specialized coatings company with over a century in rust prevention. Their Chassis Saver line provides durable, high performance underbody protection by bonding to rust and sealing metal surfaces against corrosion and environmental damage.

Q: Can UCP99-01 be applied directly over rusted steel?
A: Yes, It bonds to tightly adhered rust after light preparation (e.g. wire brushing). Do not remove all rust; the coating "bites" into rough rust for adhesion.

Q: Is a primer or topcoat required with Chassis Saver UCP99-01?
A: No, It is designed as a single-component system with no primer or topcoat necessary. For bare aluminum, however, a suitable primer may be needed.

Q: What substrates or conditions reduce its effectiveness?
A: Bare, smooth aluminum does not adhere well; aluminum should be primed first. Also, apply thin coats; excessively thick layers may trap moisture and cause bubbles during curing.