Evercoat 100120 Rage Xtreme Premium Lightweight Body Filler, 128 fl oz (Pinhole-Free Formula)
Evercoat 100120 Rage Xtreme Premium Lightweight Body Filler, 128 fl oz (Pinhole-Free Formula)
- Evercoat 100120 Rage Xtreme is a premium lightweight body filler formulated for automotive repair applications. It features a pinhole-free, self-leveling formulation that sands easily with 80 grit, designed to work with modern HAPS-compliant and waterborne coatings.
- Features:
- Pinhole-free formulation reduces defects and rework in final finishing.
- Self-leveling consistency helps produce smooth surfaces with fewer tool marks.
- Sands with 80 grit sandpaper allows faster material removal before finishing.
- Designed for modern coatings formulated to resist penetration from aggressive waterborne and solvent systems.
- Specifications:
- Manufacturer: Evercoat
- Part Number / SKU: 100120
- Volume: 128 fl oz (1 gallon equivalent)
- Approved Substrates: Steel, Aluminum, Fiberglass, Galvanized Steel, SMC
- Mixing Ratio: 2 % cream hardener by weight
- Approximate Set Time: 5-6 minutes at 72 °F (22 °C)
- Max Sanded Thickness: 1/4 inch (6 mm)
- Sanding Sequence: start with 80 grit, finish with 180 grit
- Evercoat 100120 also known as Evercoat Rage Xtreme body filler, Evercoat 100120 Rage Xtreme, Rage "Extreme" Lightweight Filler, Evercoat pinhole-free filler, Rage Xtreme premium filler.
Evercoat produces professional body repair systems. Rage Xtreme is engineered for modern refinishing demands, offering a high-performance, lightweight filler that minimizes imperfections and supports current coating systems.
Q: What hardener should I use and how much?
A: Use Evercoat cream hardener in the recommended amount of 2% by weight (ribbon of hardener across a 4-inch puddle) per the TDS.
Q: Can I apply Rage Xtreme over existing clearcoat or primer?
A: You must properly prep the surface clean, degrease, remove gloss, feather edge, and ensure mechanical adhesion. Evercoat's TDS indicates standard prep before applying.
Q: How do I know if I mixed correctly?
A: When mixed properly, the filler should turn uniform color with no streaks; test a small area to confirm proper cure before applying heavily. Excess hardener may reduce pot life or cause heat.
